Network Management

Occasional Contributor II

AppRF data missing from local controller AP's.

We have master/local setup and we decided to move all of our AP's to local (aruba recommended). Ever since we made the move, none of the AppRF data (only see mininmal lldp/udp traffic)  shows up on the on AirWave. We have AppRF enabled on both controllers and has only worked on the master prior to merging all AP's to the local. Is there something I'm missing on the AirWave or the local controller to get the AppRF to display on AirWave. 

AirWave AppRF view for all clients:



Re: AppRF data missing from local controller AP's.

Do you have amon enabled on the local controller? 

Sent from Nine

If this response is more than 1 year old, it may no longer be accurate. Please consult official Aruba documentation, TAC or your Aruba SE.

| Aruba Alumni | @timcappalli | |

Occasional Contributor II

Re: AppRF data missing from local controller AP's.

Looks like it's not enabled on the local and AMON vs SNMP polling is disabled, not sure if these option matters.



Guru Elite

Re: AppRF data missing from local controller AP's.

The airwave option does not matter.

Not having it enabled on the local controller matters.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide