Network Management

Reply
Highlighted
Contributor I

Cisco (switch) commands required for Airwave monitoring?

Hi all,

 

Does anyone know what commands I need to enable for Cisco switch account for proper Airwave monitoring? 


I want to create dedicated user for Cisco switches which is used by Airwave and allow only required commands. I don't want to manage the switches by Airwave, only monitor.

 

 

 


Accepted Solutions
Highlighted
Guru Elite

Re: Cisco (switch) commands required for Airwave monitoring?

Cisco switch monitoring through Airwave only requires a valid SNMP read string.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba Technical Webinars

View solution in original post


All Replies
Highlighted
Guru Elite

Re: Cisco (switch) commands required for Airwave monitoring?

Cisco switch monitoring through Airwave only requires a valid SNMP read string.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba Technical Webinars

View solution in original post

Contributor I

Re: Cisco (switch) commands required for Airwave monitoring?

Thanks cjoseph!

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: