Hello Guys,
I have the same issue working with my Airwave. I tried both procedure suggested without effect and continuing showing the error below:
Fri Jun 7 21:05:54 2019 System Error in SNMP polling: Unknown error(interface_monitor)
(...omitted 10 duplicate messages...)
Fri Jun 7 20:54:28 2019 System Error in SNMP polling: Unknown error(interface_monitor)
Fri Jun 7 20:53:36 2019 System Poll now complete
Let me know guys, if you have any update regard this subject.
Thanks,
@erike wrote:
Monitoring 5900 series switches in Airwave works fine at this project. The switches are visible in the topology which was the reason I wanted to have them in Airwave.
I still have an issue with 5700 series. I get an error in Airwave: HPE OfficeConnect Switch Error in SNMP polling: Unknown error(interface_monitor) which I can't resolve or find any info on.
SNMP is configured exactly the same as the 5900 series and I see some info in Airwave: CPU Usage and Uptime. Switches do not appear in the topology and I don't see interface information.
It doesn't have a priority though since there are no AP's or Clients connected to these switches. Opening a TAC case is not possible for this since this phase of the project has ended and I have no access to the implementation until the next phase starts.
It would just have been nice to see these switches in the topology. I might remove them from Airwave altogether in the next phase of the project and save the licenses, unless someone can tell me what the difference is between both series. Both switch series and Airwave are on last f/w versions to this date.
thanks,
Erik