We are looking to migrate our DHCP service from an Aruba OS switch to a Linux server as it is more scalable.
Does anyone know the correct syntax for DHCP option 43 on a Linux server ?
Below is sample config we were using on Aruba OS switch:
dhcp-server pool "East-Quad"
default-router "10.10.1.1"
network 10.10.1.0 255.255.255.0
option 43 ascii "Eastquad,10.80.2.201,secret123"
option 60 ascii "ArubaInstantAP"
range 10.10.1.10 10.10.1.100
exit
Below is a sample dhcp.conf file on linux server, but how would I include Airwave Group and Airwave Pre Shared Key ?
option serverip code 43 = ip-address;
class "vendor-class" {
match option vendor-class-identifier;
}
subnet 10.10.1.0 netmask 255.255.255.0 {
default-lease-time 200;
max-lease-time 200;
option subnet-mask 255.255.255.0;
option routers 10.10.1.1;
subclass "vendor-class" "ArubaInstantAP" {
option vendor-class-identifier "ArubaInstantAP";
#
# option serverip <loopback-IP-address-of-master-controller>
#
option serverip 10.80.2.201;
}
range 10.10.1.10 10.10.1.100;
}