Network Management

last person joined: 8 hours ago 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

Configuring SNMP with errors

This thread has been viewed 2 times

  • 1.  Configuring SNMP with errors

    Posted Sep 18, 2018 04:34 AM
      |   view attached

    Hi! I am configuring SNMP in an aruba switch 5412R, and I dont get to make it works. I have been troubleshooting and I got the attached results. Does anyone know which is the problem?



  • 2.  RE: Configuring SNMP with errors

    Posted Sep 18, 2018 09:08 AM

    Hi,

     

    this looks like you try to read a Cisco specifig value from your HPE/Aruba switch.

    Only general (standard mib) values and HPE/Aruba specific values are available on these switches ;-)

     

    Regards, Jörg

     

     



  • 3.  RE: Configuring SNMP with errors
    Best Answer

    Posted Sep 19, 2018 03:56 AM

    Yes it was a smaal part of the problem, but the real problem was that we havent access to the switch because of the lack of the

    snmp-server response-source dst-ip-request-source command. 

    Entering that command have let us to have access to the equipment and using the new MIB.

    Thanks Jorg!



  • 4.  RE: Configuring SNMP with errors

    Posted Sep 19, 2018 07:53 AM
    Can you share some more logs