Network Management

last person joined: 4 days ago 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

Creating an Alert for failed WPA2

This thread has been viewed 0 times

  • 1.  Creating an Alert for failed WPA2

    Posted Aug 15, 2017 04:37 AM

    Hi Airheads,

    I tried to create a trigger that will alert the GUI icon , when

    wlsxMgmtUserAuthenticationFailed is being sent from an SNMP trap.

    (Because not all auth failuers are due 802.1x)

     

    Attached screenshot:

    1.jpg2.jpg

     

    Please advise how to accomplish this need.

     

    Thanks.

     

    Asa

     



  • 2.  RE: Creating an Alert for failed WPA2

    EMPLOYEE
    Posted Aug 15, 2017 07:18 AM

    Hi,

     

    Use wlsxNUserAuthenticationFailed trap event in trigger condition,This trap indicates that a user authentication has failed.

     

    Regards,

    Pavan



  • 3.  RE: Creating an Alert for failed WPA2

    Posted Aug 15, 2017 10:15 AM

    Thanks - but did u looked on the screenshots..that what i did - without results , even due , i checked the AW snmp trap logs , and i can see events like this.

     

    Please advise

     

    Me



  • 4.  RE: Creating an Alert for failed WPA2

    EMPLOYEE
    Posted Aug 15, 2017 10:23 AM

    Hi,

     

    Trap which I shared is different, try below condition along with trap which you are using

    5.PNG

     

    Regards,

    Pavan