Network Management

Hi,

Customer want to develop their own dashboard.

They want to use SNMP to monitor each AP’s Radio usage.

He wants to display each AP’s Radio usage on dashboard like in a controller’s Radio usage; Dashboard / Usage / Radios

How can we fill out the blank using SNMP?

1.Can we get the information from controller ?

1. If not, how can we get the information from each AP?

* The Radio Usage unit is bps!

Let us know  how can we get these information using SNMP.

Please read the post here:  http://community.arubanetworks.com/t5/AirWave-and-Network-Management/Monitoring-Aruba-APs-with-cacti/m-p/1711/highlight/true#M47 on how to get information via SNMP from the controller for access points.

The controller itself must be polled, as the APs do not respond to SNMP.

I test this OID, wlanAPRadioRxRate and wlanAPRadioTxRate.

wlanAPRadioRxRate – .1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.7

wlanAPRadioTxRate – .1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.8

OID use.

wlanAPradioRxRate + AP MAC (DEC) + Radio Number(5Ghz : 1 , 2.4GHz : 2) 

the contents of the MIB Guide is like going on wrong.  (kiloByte/s -> Byte/s)

Please refer to the information that we have tested.

It seems to be "Byte / s".

Attachment(s)

Contollers SNMP Test.pptx   514 KB 1 version