SNMP walk is failing like so... Not sure if I'm using the correct syntax/switch at the end...
[root@localhost mercury]# s2w 192.168.254.249 aruba .1
Timeout: No Response from 192.168.254.249
and I'm using v2 as you'll see..
I'm no Airwave expert by the way..... Here's what I've done to attempt to add the switch...
On Airwave:
Added a new device via Device Setup > Add > Aruba Device > Add. Added the IP of the switch and set the SNMP community to aruba.
On the switch:
(S2500-24P-1) (config) #snmp-server community aruba
(S2500-24P-1) (config) #snmp-server host 192.168.254.9 version 2c aruba
(S2500-24P-1) (config) #write me
Airwave and the switch are on the same VLAN.. In fact Airwave is patched into the switch.
Cheers
James