Network Management

Reply
Moderator

Re: Installation and Config of SNMP Client for External Monitoring of Airwave Server

That's news to me!  Looks like all the entries are updated by employees, sales reps or partners.


Rob Gin
Senior QA Engineer - Network Services
Aruba Networks, a Hewlett Packard Enterprise Company
Contributor I

Re: Installation and Config of SNMP Client for External Monitoring of Airwave Server

That's what i also figured out.

I am a customer, and would like to vote for this request.
Else i don't think you really get much votes for this, because most partners i guess don't need this. This is mostly use in operation and not during projects.

Highlighted
Occasional Contributor I

Re: Installation and Config of SNMP Client for External Monitoring of Airwave Server

Hello,

 

I have an Airwave with 8.2.6.1 firmware, an external monitoring system is requesting it by snmp (GetRequest system.sysUpTime.0) but Airwave isn´t answered.

 

$ tcpdump port 161
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
16:13:54.018458 IP 10.0.128.84.46396 > redWifiArubaR.snmp:  GetRequest(28)  system.sysUpTime.0
16:14:24.045036 IP 10.0.128.84.46396 > redWifiArubaR.snmp:  GetRequest(28)  system.sysUpTime.0
16:16:13.269786 IP 10.0.128.84.56652 > redWifiArubaR.snmp:  GetRequest(28)  system.sysUpTime.0
16:16:43.298915 IP 10.0.128.84.56652 > redWifiArubaR.snmp:  GetRequest(28)  system.sysUpTime.0
16:18:13.252508 IP 10.0.128.84.54447 > redWifiArubaR.snmp:  GetRequest(28)  system.sysUpTime.0
16:18:43.280854 IP 10.0.128.84.54447 > redWifiArubaR.snmp:  GetRequest(28)  system.sysUpTime.0
16:20:15.494277 IP 10.0.128.84.50553 > redWifiArubaR.snmp:  GetRequest(28)  system.sysUpTime.0
16:20:45.523152 IP 10.0.128.84.50553 > redWifiArubaR.snmp:  GetRequest(28)  system.sysUpTime.0
16:22:18.030815 IP 10.0.128.84.42072 > redWifiArubaR.snmp:  GetRequest(28)  system.sysUpTime.0
16:22:48.059898 IP 10.0.128.84.42072 > redWifiArubaR.snmp:  GetRequest(28)  system.sysUpTime.0
^C
10 packets captured
10 packets received by filter
0 packets dropped by kernel

I guess "SNMPD for polling" isn´t still enable on this version (8.2.6.1), isn´t it?

 

I´m checking 8.2.6 official documents and i don´t see that option was enabled.

 

Thank you.

 

Best regards,

Moderator

Re: Installation and Config of SNMP Client for External Monitoring of Airwave Server

Correct, it became a known feature request to add the ability to configure AirWave to be SNMP pollable.  Right now, there's no SNMPD running in the background.  With the current AMPCLI options, there's no way to configure it.


Rob Gin
Senior QA Engineer - Network Services
Aruba Networks, a Hewlett Packard Enterprise Company
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: