Network Management

To whom it may concern,

Not sure what I'm doing wrong here but I can't seem to ping any of my default gateways I tend to connect my laptop to. For instance, If I'm on Vlan 2 and I ping Vlan 202 (172.20.2.2) i Cannot reach it. I have ip routing enabled yet it doesn't seem to want to work. However, from the Aruba I can ping anything I want. Firewall is disabled on my laptop. Here is the config.

Running configuration:

; JL259A Configuration Editor; Created on release #WC.16.05.0004
; Ver #12:08.1d.9b.3f.bf.bb.ef.7c.59.fc.6b.fb.9f.fc.ff.ff.37.ef:ba
hostname "Core"
module 1 type jl259a
trunk 21 trk1 trunk
trunk 22 trk2 trunk
trunk 23 trk3 trunk
trunk 24 trk4 trunk
trunk 25 trk5 trunk
trunk 26 trk6 trunk
trunk 27 trk7 trunk
trunk 28 trk8 trunk
sntp unicast
sntp 600
sntp server priority 1 xxx.xxx.xxx.xxx
time daylight-time-rule continental-us-and-canada
time timezone -xxx
ip routing
ip multicast-routing
snmp-server community "public" unrestricted
router rip
redistribute connected
enable
exit
router pim
enable
exit
vlan 1
name "xxx"
no untagged 2-20
untagged 1,Trk1-Trk8
ip address 172.16.0.1 255.255.254.0
ip igmp
ip pim-sparse
ip-addr any
exit
dhcp-server
exit
vlan 2
name "xxxx"
untagged 2-12
tagged Trk1-Trk8
ip address 172.16.2.1 255.255.254.0
ip igmp
ip pim-sparse
ip-addr any
exit
exit
vlan 4
name "xxx"
tagged Trk1-Trk8
ip address 172.16.4.1 255.255.254.0
ip igmp
ip pim-sparse
ip-addr any
exit
exit
vlan 6
name "xxx"
tagged Trk1-Trk8
ip address 172.16.6.1 255.255.254.0
ip igmp
ip pim-sparse
ip-addr any
exit
exit
vlan 202
name "xxxx"
untagged 13-20
tagged Trk1-Trk4
ip address 172.20.2.2 255.255.255.0
ip igmp
ip pim-sparse
ip-addr any
exit
exit
spanning-tree Trk1 priority 4
spanning-tree Trk2 priority 4
spanning-tree Trk3 priority 4
spanning-tree Trk4 priority 4
spanning-tree Trk5 priority 4
spanning-tree Trk6 priority 4
spanning-tree Trk7 priority 4
spanning-tree Trk8 priority 4
no tftp server
no autorun
no dhcp config-file-update
no dhcp image-file-update
no dhcp tr69-acs-url
dhcp-server pool "vlan1"
authoritative
default-router "172.16.0.1"
network 172.16.0.0 255.255.254.0
range 172.16.1.1 172.16.1.254
exit
dhcp-server enable
password manager

Please assist. I erase startup config and dropped in the config but it still didn't make a difference. I could try to reinstall the firware but I'm hoping I don't have to reboot the switch again since the site is active. 

Thank you in advance

Do you have static IP assignment on the other vlans than VLAN1?

When in one of the VLANs, can you ping the switch IP for the same VLAN?

Can you ping a switch IP in another VLAN?

Do you see the ARP entries in the switch for your clients? Do you see the ARP entries for the switch IP in your client?

If your default gateways are not the switch IP addresses, do you have a route back from your routers/gateways for the IP addresses you assigned to the VLANs pointing to your switch?

Probably easiest to find someone to troubleshoot together, like your reseller/partner, or Aruba Support.