Network Management

last person joined: 5 hours ago 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

New AirWave install, Aruba AP's show status DOWN

This thread has been viewed 0 times

  • 1.  New AirWave install, Aruba AP's show status DOWN

    Posted Apr 27, 2015 04:32 PM

    Getting up and running with a fresh install of AirWave
    (There was a previous installation using a different IP address)

     

    When adding manually adding Aruba AP's their status shows DOWN
    Manually adding other devices is working fine

     

    Perhaps my SNMP creds are incorrect? I matched the strings on the controller under CONFIGURATION > MANAGEMENT > SNMP

     

    Is there a place to set SNMP per device group or VAP?

     

    Thanks



  • 2.  RE: New AirWave install, Aruba AP's show status DOWN
    Best Answer

    EMPLOYEE
    Posted Apr 27, 2015 04:35 PM
    The APs will be discovered through the controller. Is the controller up in AirWave?

    Thanks,
    Tim


  • 3.  RE: New AirWave install, Aruba AP's show status DOWN

    Posted Apr 27, 2015 04:57 PM

    Re-adding the controllers did the trick! Once I did that everything snapped into place.

     

     

    It's worth noting that Airwave interacts with the Aruba AP's via the controller instead of directly

     

    Thank you