Network Management

last person joined: 2 hours ago 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

Point by point AMP Failover server config needed

This thread has been viewed 3 times

  • 1.  Point by point AMP Failover server config needed

    Posted Nov 28, 2017 03:15 PM

    Hello Folks

    I know that loading on FO licenses on a newly installed AMP gives you some different menu options - 

     

    Have to get a customer "documentation" on configuring an FO AMP - 

    Does anyone have this elusive documentation and can point me in the correct direction ? - btw - in need "how to" docs (we have too many "can do" docs).

     

    thanks,

    t 



  • 2.  RE: Point by point AMP Failover server config needed
    Best Answer

    Posted Nov 29, 2017 02:37 PM

     

    Hello,

     

    Please login into the Failover AMP and follow these steps to add a watched AirWave server:

     

    1. Navigate to Home > Overview > Watched AMPs, then click Add.
    2. Enter the Primary AirWave server's hostname or IP address.
    3. Enter the name used for logging in to the AirWave server.
    4. Enter the password (alphanumeric without spaces) for the user being created, then confirm the password.
    5. Enter how many polls are missed before the failover AMP triggers a failover event. By entering 3, as shown in Figure 1, the failover server will trigger a failover event after 3 missed polls during 5-minute polling intervals.

     

    Please follow the steps below to test the AMP failover and restore 

     

    http://community.arubanetworks.com/t5/Monitoring-Management-Location/How-to-test-AMP-Failover-and-Restore/ta-p/187198

     

    Regards,

    Sreedhar