Network Management

Reply
Occasional Contributor I

RADIUS configuration for REST API

Hello, I have J9775A device and I am trying to configure RADIUS for REST API connections. I found this manual and I am trying to follow it, but I cannot find authentication configurations from my device regarding AAA for REST such as "aaa authentication rest *". I have upgraded my device's firmware to the latest. Manual is found here:
https://support.hpe.com/hpsc/doc/public/display?docId=a00076277en_us

MVP Guru

Re: RADIUS configuration for REST API

Please contact Aruba Support. I don't have a 2540 to test with, but on my 2930F (running version 16.08.0002) the command is there:

sw01(config)# aaa authentication rest login radius
 local                 Use local switch user/password database.
 none                  Do not use backup authentication methods.
 authorized            Allow access without authentication.
 server-group          Specify the server group to use.
 two-factor-type       Use the certificate or public key for the first authentication method and username/password for the second authentication method.
 <cr>

If you are running recent firmware (like 16.08 or newer) and you don't see the commands and are logged in with full manager rights, please work with TAC to see what is wrong.

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
Occasional Contributor I

Re: RADIUS configuration for REST API

Yeah, I am running the latest firmware and have tried other versions also. Here is what I can see:

Capture.PNGAtleast for what documantation tells is that I should have rest option there. I'll either get a new switch and test with it or contact TAC.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: