Network Management

last person joined: 7 hours ago 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

how to use cli upgrade IAP 103 and IAP 305

This thread has been viewed 7 times

  • 1.  how to use cli upgrade IAP 103 and IAP 305

    Posted Jan 17, 2019 03:42 AM

    I know the order.

    (InstantAP)#upgrade-image2 Orion@tftp://192.168.0.1/mips32.ari;Cassiopeia@tftp://192.168.0.1/armv5te.ari

     

    but,I don't know IAP 103 or IAP 305 or IAP 205 image format  .

    where to see the image format ?ex:mips32.ari and armv5te.ari 

    Thanks in advance for any help

     



  • 2.  RE: how to use cli upgrade IAP 103 and IAP 305

    EMPLOYEE
    Posted Jan 17, 2019 05:52 AM

    What are you trying to do?



  • 3.  RE: how to use cli upgrade IAP 103 and IAP 305

    Posted Jan 20, 2019 10:51 PM

    I'm sorry to reply so late.IAP103 and IAP 205 was in a lan.NOW,I want to upgrade image ,how to use cli to upgrade ?I dont want to disconnect IAP103 or IAP 205.



  • 4.  RE: how to use cli upgrade IAP 103 and IAP 305

    EMPLOYEE
    Posted Jan 20, 2019 11:04 PM

    Those images are to convert them from IAPs to Campus APs.  Why dont you use the GUI for either conversion?



  • 5.  RE: how to use cli upgrade IAP 103 and IAP 305

    Posted Jan 21, 2019 03:32 AM

    what i mean is mix mode IAP(iap 103 and IAP 205) how to upgrade use cli，because my customer want to  time upgrade use cli

    @cjoseph wrote:

    Those images are to convert them from IAPs to Campus APs.  Why dont you use the GUI for either conversion?

     



  • 6.  RE: how to use cli upgrade IAP 103 and IAP 305
    Best Answer

    EMPLOYEE
    Posted Jan 21, 2019 06:54 AM

    Okay.  I understand the problem.  The screenshot from the documentation is wrong here:  https://www.arubanetworks.com/techdocs/Instant_42_WebHelp/InstantWebHelp.htm?_ga=1.43038629.1615771646.1440445030#CLI_commands/upgrade-image.htm?Highlight=upgrade

    Screenshot 2019-01-21 at 05.49.10.png

    For the IAP 103, the image is called "Pegasus" and the Image for the IAP 305 is called "Ursa".  To upgrade a multi-class IAP cluster with an IAP103 and IAP-305 to Instant 6.5.2.0_59123, you would do this:

     

    upgrade-image2 Pegasus@tftp://192.168.0.1/ArubaInstant_Pegasus_6.5.2.0_59123;Ursa@tftp://192.168.0.1/ArubaInstant_Ursa_6.5.2.0_59123

    Please try that and see if it works.  We will get the documentation Corrected,



  • 7.  RE: how to use cli upgrade IAP 103 and IAP 305

    Posted Jan 21, 2019 07:13 AM

    Thanks you very much,i wil try to do this.If successful, I'll  reply。

     I am very sorry for my poor English。Thank you agin。



  • 8.  RE: how to use cli upgrade IAP 103 and IAP 305

    EMPLOYEE
    Posted Jan 21, 2019 07:15 AM

    No worries.  My english is not very good either :)

    Please let us know if it works, so we can get the documentation corrected.



  • 9.  RE: how to use cli upgrade IAP 103 and IAP 305

    Posted Jan 21, 2019 07:24 AM

    ok, handson .I will do this tomorrow.I'm here at 8:30 PM.



  • 10.  RE: how to use cli upgrade IAP 103 and IAP 305

    Posted Jan 22, 2019 02:07 AM

    This command is valid。I have succed ,thanks again.



  • 11.  RE: how to use cli upgrade IAP 103 and IAP 305

    EMPLOYEE
    Posted Jan 22, 2019 02:15 AM

    Thank you.  We will get the online help corrected.



  • 12.  RE: how to use cli upgrade IAP 103 and IAP 305

    EMPLOYEE
    Posted Jan 23, 2019 05:04 AM

    Thank you for your patience.  We have fixed the online help here:  https://www.arubanetworks.com/techdocs/Instant_83_WebHelp/content/instant_cli/upgrade-image.htm and we will be fixing the other ArubaOS version online help shortly.