Network Management

Reply
Occasional Contributor II

"mgmt-server"- command relating to AirWave.

Hello everybody,

I've got a question on "mgmt-server"-command relating to AirWave 7.7

We've master-locals environment with 6.3.1.2. Do we need to configure

mgmt-server type amp primary-server 10.11.12.13 profile AIRWAVE

on locals or only on the master?

 

I'm not able ro run "mgmt-server profile" command on locals:

(local1) (config) #mgmt-server profile AIRWAVE
                                        ^
% Invalid input detected at '^' marker.


Accepted Solutions
Highlighted
Guru Elite

Re: "mgmt-server"- command relating to AirWave.

The profile can only be configured on the master.  The "mgmt-server type amp primary-server 10.11.12.13 profile" command can be run on locals, as well.

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba Technical Webinars

View solution in original post


All Replies
Highlighted
Guru Elite

Re: "mgmt-server"- command relating to AirWave.

The profile can only be configured on the master.  The "mgmt-server type amp primary-server 10.11.12.13 profile" command can be run on locals, as well.

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba Technical Webinars

View solution in original post

Highlighted
Occasional Contributor II

Re: "mgmt-server"- command relating to AirWave.

Thank you Colin,

 

it seems that I need to create profile on the master. It will be copied to locals.

And primary-server needed to be configured on all controllers as well, since the airwave server get informations (ex. Home/Firewall) from locals and not from master.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: