Network Management

Reply
Occasional Contributor I

show interface status - Link-Aggregation

Hello,

I have question about Link-Aggregation,

In HP, when you press:  display interface brief, I can see The real speed of the link Aggregation - 2G, But in Aruba I cant see that ,

Maybe do you know the currect command to see that ? or to see the real speed of the link-aggregation ?

Re: show interface status - Link-Aggregation

Hi,

 

Can you please elaborate on what Aruba product you are trying to see the link aggregation speed for 2G.

Occasional Contributor I

Re: show interface status - Link-Aggregation

2930F Sir.

Re: show interface status - Link-Aggregation

The 2930F is still HP ProCurve underneath - just updated with Aruba integrations and features - so the commands are still mostly the same.

 

This is the output I see from a 2930F switch, with port 25-26 aggregated/trunked. Each port says 10GigFD; the aggregate link is 10+10=20

 

2930F-Stn1-Building1SW2(config)# sh int br

 Status and Counters - Port Status

                          | Intrusion                           MDI  Flow Bcast
  Port         Type       | Alert     Enabled Status Mode       Mode Ctrl Limit
  ------------ ---------- + --------- ------- ------ ---------- ---- ---- -----
  1            100/1000T  | No        Yes     Down   1000FDx    Auto off  0
  2            100/1000T  | No        Yes     Down   1000FDx    Auto off  0
  3            100/1000T  | No        Yes     Down   1000FDx    Auto off  0
  4            100/1000T  | No        Yes     Down   1000FDx    Auto off  0
  5            100/1000T  | No        Yes     Up     100FDx     MDIX off  0
  6            100/1000T  | No        Yes     Down   1000FDx    Auto off  0
  7            100/1000T  | No        Yes     Up     100FDx     MDIX off  0
  8            100/1000T  | No        Yes     Down   1000FDx    Auto off  0
  9            100/1000T  | No        Yes     Down   1000FDx    Auto off  0
  10           100/1000T  | No        Yes     Down   1000FDx    Auto off  0
  11           100/1000T  | No        Yes     Up     1000FDx    MDI  off  0
  12           100/1000T  | No        Yes     Down   1000FDx    Auto off  0
  13           100/1000T  | No        Yes     Down   1000FDx    Auto off  0
  14           100/1000T  | No        Yes     Down   1000FDx    NA   off  0
  15           100/1000T  | No        Yes     Down   1000FDx    Auto off  0
  16           100/1000T  | No        Yes     Up     1000FDx    MDI  off  0
  17           100/1000T  | No        Yes     Up     1000FDx    MDIX off  0
  18           100/1000T  | No        Yes     Down   1000FDx    Auto off  0
  19           100/1000T  | No        Yes     Up     1000FDx    MDI  off  0
  20           100/1000T  | No        Yes     Down   1000FDx    Auto off  0
  21           100/1000T  | No        Yes     Up     1000FDx    MDI  off  0
  22           100/1000T  | No        Yes     Down   1000FDx    Auto off  0
  23           100/1000T  | No        Yes     Down   1000FDx    Auto off  0
  24           100/1000T  | No        Yes     Down   1000FDx    NA   off  0
  25-Trk1      SFP+DA1    | No        Yes     Up     10GigFD    NA   off  0
  26-Trk1      SFP+DA1    | No        Yes     Up     10GigFD    NA   off  0
  27                      | No        Yes     Down   .               off  0
  28                      | No        Yes     Down   .               off  0


Richard Litchfield, HPE Aruba
Consulting System Engineer
Network Ambassador
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: