Re: 802.1x with internal db and Radius server
03-23-2014 06:35 PM
It is on first. It was working fine.
Can I ask you if I want a rule to be matched and only responds to request if NAS ID matches then how should I achieve this? What should be the parameters at both ends that is controller and nps?
On controller it is NAS ID but on nps it is NAS PORT ID I dont know whats the difference.
03-23-2014 06:53 PM - edited 03-23-2014 06:56 PM
The NAS-ID configured in the Radius Server on the Aruba Controller is the name NAS-ID that is seen in the NPS event viewer and can be referenced in the remote access policy.
If you have two different SSIDs and you want to differentiate between them, on the Aruba Controller you will need to (1) Create a new Radius server exactly like the previous one, except the NAS-ID is different (2) Create a new server group and put that new server in it (3) Add that server group to the new AAA profile for the Virtual AP for that new WLAN:
Radius Server Config on the Aruba Controller:
How it looks in the Event Viewer on the NPS server:
How you make it a condition in your remote access policy on NPS:
*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars