Security

Reply
Highlighted

Basic setup for 2930F and ClearPass

Hello,

Have somebody an howtodo to setup a 2930F 802.1X clearpass authentication?

At this time we just try to see a radius query in the log of the clearpass but we have nothing 

The switch is running version 16.10.03

Thank you

Michel

MVP Guru

Re: Basic setup for 2930F and ClearPass

Have you followed the below? Its an excellent video and shows you how to configure accordingly. Have you checked the event viewer and confirmed the NAD details are correct of the switch?

 

*EDIT - Would help if I added the link  

 

https://www.youtube.com/watch?v=GWgfHCkDHMM&t=29s


ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Highlighted

Re: Basic setup for 2930F and ClearPass

Can you please send me the link to show the video?

Thank you

Michel

Highlighted

Re: Basic setup for 2930F and ClearPass

We folow this video

But it doesn't work

Perhaps the problem is linked that on the ClearPass VM we have only connect the management interface

Do we need to make it work using the data port?

Michel

Highlighted
MVP Guru

Re: Basic setup for 2930F and ClearPass

You should ensure that the VM NICs are connected, you do not need an IP on the data interface if you are not using. Have you checked the Event logged for any NAD errors?


ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Highlighted
MVP Guru

Re: Basic setup for 2930F and ClearPass

Can you share what you see in Access Tracker when the requests comes in to ClearPass?

Does it show up in Access Tracker?

Does it match the correct (expected) service?

Does the authentication succeed?

What is the enforcement returned?

 

In case you prefer not to share that information in a public forum like this, please work with Aruba Support.

 

I typically only use the management port on ClearPass and disable the data port by not putting any IP on it. Data port should be used only in cases where you absolutely need it, and understand how it exactly works. So there is no need to configure the data port in your case.

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: