As mentioned before: you will need to replace the certificate on the IAP/controller by your own. There is no way to make it work with the securelogin.arubanetworks.com, and if you ever see that in configuration or in your browser there is a configuration issue.
If you see certificate warnings at any point in the process, you have a configuration issue and expect it not to work at all or not reliably. Some devices will just stop if they see invalid certificates.
This post/document may help you understand the process and help to solve it.
One very important thing is that you will need to have:
- A public trusted certificate for your ClearPass & a public trusted certificate for your instant AP or controller.
or - a multi-SAN or wildcard certificate (also public trusted) that matches both ClearPass and your AP/controller.
If you don't have those, don't even try to troubleshoot what is wrong as it is the certificates to start with.
In case you get stuck, please reach out to Aruba support as they are trained in following the steps and find where the issue lies (and then solve it).
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC.
------------------------------
Original Message:
Sent: Nov 24, 2020 08:55 AM
From: David Hurley
Subject: CPPM Guest Login page redirect me back to registration page
Hi,
Did this get resolved ? I am getting the same issue ( if I use default cert/securelogin it work - well you get cert errors as expected)
Any help would be appreciated
------------------------------
David Hurley
Original Message:
Sent: Oct 23, 2017 11:22 AM
From: Giuseppe Pasinelli
Subject: CPPM Guest Login page redirect me back to registration page
Hi,
any suggestions?
Thanks
Beppe