Security

last person joined: yesterday 

Forum to discuss Enterprise security using HPE Aruba Networking NAC solutions (ClearPass), Introspect, VIA, 360 Security Exchange, Extensions, and Policy Enforcement Firewall (PEF).
Back to discussions
Expand all | Collapse all

Christie Brio and Airgroup

This thread has been viewed 0 times

  • 1.  Christie Brio and Airgroup

    Posted Sep 29, 2014 12:07 PM

    Hello there,

     

    I was wondering if one of you successfully deployed a Christie Brio and a multi network scheme so it becomes discoverable through Airplay?

     

    Please note that it is the wired version of Christie.. with the wireless one we have no issue.

    Long story short :

    wired christie to wired user device = works fine

    wireless Christie to wireless user = works fine

    wired christie to wireless= no working at all .

     

    Thx.



  • 2.  RE: Christie Brio and Airgroup

    EMPLOYEE
    Posted Sep 29, 2014 12:08 PM

    You likely will need to either:

     

    1) Redirect layer 2 advertisements to a tunnel to the controller(s)

    2) Trunk the wired VLAN where the devices live to the controller(s)



  • 3.  RE: Christie Brio and Airgroup

    Posted Sep 29, 2014 02:50 PM

    That works only when the Brio is on the same subnet. :(



  • 4.  RE: Christie Brio and Airgroup
    Best Answer

    EMPLOYEE
    Posted Sep 29, 2014 02:52 PM
    Yes, which is why you need to trunk the wired Brio subnet to the controller so it can see that packets. (or redirect them to the controller via a GRE tunnel)