Frequent Contributor I

ClearPass guest login question/issue

I have ClearPass setup to accept guest logins and social logins from Facebook, Instagram and Twitter.


All works great from APs connected to my master controller. This is the controller whose name I put into the Address Field on my web login page in ClearPass Guest.


If an AP is connected to one of my other controllers, it will fail after authenticating with the social network. I believe that's because it tries to hit my master controller at https://<master-controller>/login and that is not where it was originally redirected from and something freaks out.


If I change the Address Field in ClearPass to my other controller, it works fine for APs connected to that controller.


I'm guessing I missed something in the setup?


I'm on Aruba OS on my controllers and ClearPass 6.7.3.x


Any help would be appreciated. Thanks.

Guru Elite

Re: ClearPass guest login question/issue

ClearPass web login should be configured with the controller's captive portal certificate common name. That certificate should be install on all controllers.

| Tim Cappalli | Aruba Security | @timcappalli | |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Frequent Contributor I

Re: ClearPass guest login question/issue

Thanks for the reply.


Should I generate a new cert, not using the controller(OpenSSL or something), or can I import the already existing certificate into the other controllers?



Frequent Contributor I

Re: ClearPass guest login question/issue

Old cert would not work, I created a new one and loaded on both controllers.



Search Airheads
Showing results for 
Search instead for 
Did you mean: