Security

Reply
Occasional Contributor II

Clearpass Guest Access with Aruba IAP

Hi, 

I followed the following video to configure self registeration page, what happened when I test is that the self registration page loads, registeration suceed , a username and PW is generated, and login also suceed but after login I am redirected back to the self regsitration page endlessly.

https://www.youtube.com/watch?v=jXyd_q7T7aE&list=PLsYGHuNuBZcb0xD05v9zdwv7NlUG_8oJS&index=17

 

MVP Guru

Re: Clearpass Guest Access with Aruba IAP

In redirect URL have you provided same guest self registration URL?

 

Redirect URLSpecify a redirect URL if you want to redirect the users to another URL.
Regards,
Pavan
If my post address your queries, give kudos and accept as solution!
NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Highlighted
MVP Guru

Re: Clearpass Guest Access with Aruba IAP

Try changing the default certificate on the IAP
https://community.arubanetworks.com/t5/Controller-less-WLANs/ArubaOS-Default-Certificate-Revocation-FAQ-Instant/ta-p/275814

Sent from Mail for Windows 10
Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor II

Re: Clearpass Guest Access with Aruba IAP

Hi guys, it finally worked, 

please see the attached document, in the address field I had configured the IP address of the instant access point.

But when I change it back to securelogin.arubanetworks.com, it worked, and I dont understand why.

Contributor I

Re: Clearpass Guest Access with Aruba IAP

Had the same problem, o got a different solution for myself.

 

If you are interested:

 

https://community.arubanetworks.com/t5/Security/IAP-ClearPass-Self-Registration-Captive-Portal/m-p/549661/thread-id/45105/highlight/false#M45128

 

#ACMP #ACSP
Occasional Contributor II

Re: Clearpass Guest Access with Aruba IAP

So no clue why in the address field it should be entered "securelogin.arubanetworks.com"?

Aruba Employee

Re: Clearpass Guest Access with Aruba IAP

The domain securelogin.arubanetworks.com is used to send the credentials of the user to the IAP. The IAP uses those credentials to authenticate the user and allow network access. 

In ClearPass, you should see an authentication request in the access tracker. 

The Domain name needs to be aligned with the certificate CN of the Captive Portal Certificate on the IAP. 


visit our Youtube Channel:
https://www.youtube.com/channel/UCFJCnuXFGfEbwEzfcgU_ERQ/featured
Please visit my personal blog as well:
https://www.flomain.de
Contributor I

Re: Clearpass Guest Access with Aruba IAP

Hi,

 

I understand.

But In fact, without "dynamic Address" under "Nas Vendor Settings" I can not see any auth request.

 

So, what is the difference between: with dynamic address and without ?

#ACMP #ACSP
Aruba Employee

Re: Clearpass Guest Access with Aruba IAP

from My understanding this is needed as the controller ip of the iap can change depending to which iap you are connected.

visit our Youtube Channel:
https://www.youtube.com/channel/UCFJCnuXFGfEbwEzfcgU_ERQ/featured
Please visit my personal blog as well:
https://www.flomain.de
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: