Hi AirHeads Community,
I'm working with a customer who wants to have 802.1X wired authentication on his HP switches. I configured a test switch and port for 802.1X eap-peap authentication and have connected a laptop. In ClearPass I see the request being Accepted and using the default [Allow Access Profile] as the enforcement. Customer has 'untagged vlan 1' on the switch ports and they only use VLAN 1 on this network. After successful authentication, client is not receiving an IP address however. I'm not sure if I need to change the enforcement profile or if it's something on the switch that needs to be updated.
wired configuration is as follows:
interface I22
untagged vlan 1
aaa port-access authenticator
aaa port-access authenticator quiet-period 5
aaa port-access authenticator reauth-period 30
aaa port-access authenticator auth-vid 1
aaa port-access authenticator unauth-period 10
aaa port-access authenticator logoff-period 862400
aaa port-access authenticator client-limit 1
aaa port-access controlled-direction in
any ideas? Thanks!