Security

Reply
Highlighted
Contributor I

Clearpass acceptable latency in 6.7.x

Hi ,

I have two questions regarding latency are as below

What is the acceptable latency between the clearpass cluster nodes?

What is the acceptable latency between NAD device and ClearPass?


Accepted Solutions
Highlighted
MVP
MVP

Re: Clearpass acceptable latency in 6.7.x

Hi,

 

from ClearPass Deployment Guide for version 6.7:

 

  • Aruba recommends that the round-trip time between the NAD/NAS and a ClearPass server should not exceed 600ms.
  • The acceptable delay between cluster nodes is less than100ms (RTT less than 200ms).
  • The link bandwidth should be greater than 10 Mbps.

Regards, Jö

Please give kudos, if you like my post.
Please Accept as solution, if my post was helpful.

View solution in original post

Highlighted
Moderator

Re: Clearpass acceptable latency in 6.7.x

They do not change from release to release.


If this response is more than 1 year old, it may no longer be accurate. Please consult official Aruba documentation, TAC or your Aruba SE.

| Aruba Alumni | @timcappalli | timcappalli.me |

View solution in original post


All Replies
Highlighted
MVP
MVP

Re: Clearpass acceptable latency in 6.7.x

Hi,

 

from ClearPass Deployment Guide for version 6.7:

 

  • Aruba recommends that the round-trip time between the NAD/NAS and a ClearPass server should not exceed 600ms.
  • The acceptable delay between cluster nodes is less than100ms (RTT less than 200ms).
  • The link bandwidth should be greater than 10 Mbps.

Regards, Jö

Please give kudos, if you like my post.
Please Accept as solution, if my post was helpful.

View solution in original post

Highlighted
Contributor I

Re: Clearpass acceptable latency in 6.7.x

Hi Jo,

Thanks for response but i guess above mentioned numbers are application for 6.4.x and 6.6.x.

I am looking for same information for 6.7.x
Highlighted
Moderator

Re: Clearpass acceptable latency in 6.7.x

They do not change from release to release.


If this response is more than 1 year old, it may no longer be accurate. Please consult official Aruba documentation, TAC or your Aruba SE.

| Aruba Alumni | @timcappalli | timcappalli.me |

View solution in original post

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: