Security

Reply
Occasional Contributor I

Re: HPE 5130 - Comware 7 External Portal via ClearPass Guest

I am running into the same issue. Everything is working except for the COA. I have tried setting the device as h3c and hpe. 

 

i can see in the access tracker that the COA is being sent when the auth is succesful. 

 

If i do a packet capture on the cppm i dont see anything come and go to the switch ip.

 

radius debugging on the switch show nothing.

 

any ideas?

 

thanks in advance

Re: HPE 5130 - Comware 7 External Portal via ClearPass Guest

I was able to get it working yesterday using the HPE device vendor which was my problem.

Iv'e noticed the port bounce was sent but nothing was happening. The HPE terminate session was working and did exactly what I wanted.

Can you post a "dis current config" of switch ?
ACCX #1137, ACMP, BCNE
Satori Internetworking
http://www.net-satori.ca/
Occasional Contributor II

Re: HPE 5130 - Comware 7 External Portal via ClearPass Guest

Hello Chris, could you help me with the configuration on the switch? I've been here for days and I still can not make it work.

Guru Elite

Re: HPE 5130 - Comware 7 External Portal via ClearPass Guest

Did you follow the ClearPass Solution Guide for Wired Policy Enforcement?

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Occasional Contributor II

Re: HPE 5130 - Comware 7 External Portal via ClearPass Guest

Hi Tim,

Yes, I did. I receive the ACL and the URL of the portal, but the switch does not have the redirection.

Guru Elite

Re: HPE 5130 - Comware 7 External Portal via ClearPass Guest

Best to open a TAC case then.

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: