Security

Reply
Occasional Contributor I

Hard drive information

Hi,

I have a C2000 box. As the techspec, this should have 2x 1Tb hard drive.

But as attachment, i see only 500Gb hard drive via Admin GUI, can anyone help to guide me to check this. 

Thank you,

MVP Expert

Re: Hard drive information

There are two reasons for this.

 

  1. RAID configuration. This wil result in 1TB of useable space
  2. ClearPass will create two system partitions. During the upgrade to a new major version ClearPass will switch to the other partion. Because of this ClearPass has 500GB available. 

Willem Bargeman ACMX#935 | ACCX #822

Please give me kudos if my post was useful!
If your issue is solved mark the post as solution!
MVP Expert

Re: Hard drive information

Hi,

 

Default recommanded speciication for C2000V is 1000GB, I beleive this is same for C2000 HW appliance aswell.

 

Capture.JPG

 

During installaiton it creates two partitions 500GB of each and in GUI you will see active partiiton disk space. Login in CLI using appadmin credentials and exectue command

 

#show system-resources


Pavan Arshewar | ACCP

If my post address your queries, give kudos and accept as solution!
NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: