Hi,
Thanks for your response.
Machine authentication enforcement is not enabled. I have double checked
it. Also the rules are working properly because I can see in logs users are
put in role according to the rule specified however this is not the case
for vlan assignment. Correct vlan assignment works but not for all users.
Actually it may be working correctly but it creates two user entries on the
controller. For an example. User is authenticated and then on the
controller I see that same user has an IP from vlan10 subnet and from
vlan20 subnet.
Any further ideas please?
Farzan Qureshi
------------------
Network Administrator & Helpdesk support
Rosmini College
--
This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the system manager (
admin@rosmini.school.nz). Please note that any views or opinions presented
in this email are solely those of the author and do not necessarily
represent those of the company. Finally, the recipient should check this
email and any attachments for the presence of viruses. Rosmini College
accepts no liability for any damage caused by any virus transmitted by this
email.