Hi,
I have a 7210 (version 6.3) controller for which I have an external Captive Portal integrated.
I have external MAC caching functional via the external CP server.
MAC cache is working fine for "known" addresses in the mac cache, however, when MAC cache is not known I have the CP configured to have clients to post the registered username/password credentials to the configured radius auth server group. Problem I note is that there are no radius messages being sent with the username/password credentials and the subsequently I cannot perform web auth method.
After various tries I noted that MAC authentication is always being triggered when MAC address is known, but web authentication is not happening when I submit credentials on the CP page.
I am able to verify that the dst-nat action for the controller internal CP for the https post is being hit (via show acl hits). I am also able to verify from radius controlpath packet sniffs that there were no radius messages resulting from the client login form post.
Why is the web authentication not happening (ie. radius auth not sent) when client submits the login post?
#7210