Security

Reply
Frequent Contributor I

OnConnect Enforcement with HPE Comware

Hello,

 

On p17 of "Wired Policy Enforcement Solution Guide" it is mentioned that OnConnect is a new feature (ClearPass 6.6.1 and onwards) enabling SNMP-based enforcement. 

 

It is not mentioning firmware release LAN switches (HPE 3500, 3800, and 8206 in our case) should be running on, so I was wondering if this feature will work on any old one (from K.16.02 to KA 15.12)? Thanks in advance.

 

 

Regards,

NesaM 

Regards,
NesaM --ACMP, ACCP, CWNA--
Guru Elite

Re: OnConnect Enforcement with HPE Comware

The title of your thread says HPE Comware. Comware is not supported today but will be soon.

Regarding legacy HPE ProVision, we have only tested ArubaOS-Switch code (16+) but the older code *should* work.

Tim Cappalli | Aruba Security
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Frequent Contributor I

Re: OnConnect Enforcement with HPE Comware

Hi Tim,

 

Thank you for clarifying this, appreciated.

 

 

Regards,

NesaM

Regards,
NesaM --ACMP, ACCP, CWNA--
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: