Occasional Contributor II

Roles in Controller



kindly provide the suitable answer of following question.


Question -1 How many Role created on Controller.


1-  the same number as SSIDs

2-  as many as necessary

3- One less then the number of firewall Polices

4- the same number as firewall polices


Question-2  when the barcode scanner connect to AP,  then what is the 1st role assign to.


1- MAC authentication Defualt Role

2-Server Derived Role

3-Initial Role

4-802.1x Default Role.


kindly provide the suitable answer of above question. actuall i am preparing for ACMP exam.

Retired Employee

Re: Roles in Controller

You can find answers to the above questions in Campus VRD available at


Going through the VRD will help you prepare for your ACMP as well as ACMX. 


Best of Luck ! 



New Contributor

Re: Roles in Controller

I am quite curious about your 2nd question. So when the barcode scanner is connected, can I manually assign the 1st role to MAC authentication Defualt Role?

Guru Elite

Re: Roles in Controller

The last page of the troubleshooting document here: has a role derivation flowchart that determines the order authenticatons take place.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Search Airheads
Showing results for 
Search instead for 
Did you mean: