Hi:
I'm trying to create a captive portal with single click passthrough as outlined here:
https://arubanetworkskb.secure.force.com/pkb/articles/HowTo/R-154
But I'm not having luck.- the captive portal won't display.
I'm wondering if my problem is in the initial role? I'm also a bit confused about what creates the redirect....?
The purpose of this is to create a captive portal that tells a user that the 'Student' network is going away, hence the name 'StudentPhaseOut.'
Can anyone point me in the right direction?
Here is a relevant config excerpt:
ip access-list session captiveportal
user alias controller svc-https dst-nat 8081
user any svc-http dst-nat 8080
user any svc-https dst-nat 8081
user any svc-http-proxy1 dst-nat 8088
user any svc-http-proxy2 dst-nat 8088
user any svc-http-proxy3 dst-nat 8088
user alias mswitch svc-https dst-nat 8081
ip access-list session logon-control
user any udp 68 deny
any any svc-icmp permit
any any svc-dns permit
any any svc-dhcp permit
any any svc-natt permit
any network 169.254.0.0 255.255.0.0 any deny
any network 240.0.0.0 240.0.0.0 any deny
aaa authentication captive-portal "StudentPhaseOut-cp"
default-role "StudentPhaseOut-cp-logon"
default-guest-role "StudentPhaseOut-cp-logon"
no user-logon
guest-logon
no logout-popup-window
login-page "/upload/custom/StudentPhaseOut-cp/studentphaseoutcp.html"
no enable-welcome-page
user-role StudentPhaseOut-cp-logon
captive-portal "StudentPhaseOut-cp"
session-acl logon-control
session-acl captiveportal
aaa profile "StudentPhaseOut"
initial-role "StudentPhaseOut-cp-logon"
authentication-dot1x "default-psk"
wlan ssid-profile "Student6"
essid "Student6"
opmode wpa2-psk-aes
wpa-passphrase abcdefghijklmop...
wlan virtual-ap "Student6"
aaa-profile "StudentPhaseOut"
ssid-profile "Student6"
vlan 19
band-steering
vlan-mobility
ap-group "Dorms6"
virtual-ap "Student6"
ap-system-profile "comes-up-on-local1"