Security

last person joined: 17 hours ago 

Forum to discuss Enterprise security using HPE Aruba Networking NAC solutions (ClearPass), Introspect, VIA, 360 Security Exchange, Extensions, and Policy Enforcement Firewall (PEF).
Back to discussions
Expand all | Collapse all

Use CPPM to modify port configuration

This thread has been viewed 0 times

  • 1.  Use CPPM to modify port configuration

    Posted Apr 03, 2017 02:55 PM

    Is there a way to modify a port that is being authenticated on from a switch port to a trunk port. 

     

    Can you send a COA or command through SNMP or SSH to modify the port based on the authenticator?

     

    I have a wireless AP that is taken to other places and plugged in.  It will authenticate using 802.1x without issue, but since the port is a switch port, the AP will not be able to use all of the vlans configured on it.  If I could change it to be a trunk port then it would work as designed.  Its not a problem for the ports that are mounted in places, just the ones that move around. 



  • 2.  RE: Use CPPM to modify port configuration

    EMPLOYEE
    Posted Apr 03, 2017 02:58 PM
    What kind of switch?


  • 3.  RE: Use CPPM to modify port configuration

    Posted Apr 03, 2017 02:59 PM

    Cisco switch, different models from 3850 to 2960.