Security

Reply
Guru Elite

Re: config mobility controller and clearpass

Are you using a RADIUS service? You should definitely have an [EAP PEAP]
option in the list. Please provide a screenshot.

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Occasional Contributor II

Re: config mobility controller and clearpass

Auth.png

Highlighted
Guru Elite

Re: config mobility controller and clearpass

You have high capacity guest mode enabled. You can only use EAP-PEAP Public
in this mode.

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Occasional Contributor II

Re: config mobility controller and clearpass

Yes and how can I use anthore methods?

Guru Elite

Re: config mobility controller and clearpass

You cannot use other EAP methods in HCG mode. It is designed for scaling in
large guest deployments.

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Occasional Contributor II

Re: config mobility controller and clearpass

Thanks a lot, now I can surf using my WLAN and ClearPass

 

This solutions is oriented to a hotel and good for me to use HCG mode.

Can I use another methods for authentication??

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: