Log in to ask questions, share your expertise, or stay connected to content. Don’t have a login? Join now.
OP: @mrtwentytwo
Aruba has two types of stacking on the switches above the 2530/2540:Fabric stacking (2920,2930M,3800,3810M)Virtual Fabric Stacking VSF (2930F,5400R)VSF is simular to IRF on the Comware switches. Below is a short instruction to setup VSF. The speed needed as a VSF link is different per switch, lookup the minimal speed needed in the switch manual.
Switch1(config)# vsf member 1 link 1 1(config)# vsf enable domain 1
<switch1 will reboot>
Switch2: Made sure the switch has no configuration (has the factory-default config),connect a port on the second switch to the VSF port on the first switch.The second switch should enable VSF and add the connected port to the VSF link automatically.<switch2 will reboot> When both switches are up and running you can enable an extra VSF port for redundancy.
(config)# vsf member 1 link 1 1/2(config)# vsf member 2 link 1 2/2
Demo video :
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.