Wired Intelligent Edge (Campus Switching and Routing)

Reply
Highlighted
New Contributor

2530 - REST API equivalent to CLI

Hey,

for monitoring reasons I need to know if a switch is runnig an unsaved config.

 

Hardware is for instance a HPE Aruba 2530-24G-PoE+ (J9773A)
with Firmware YA.16.08.0001 (REST API V6.0)


On the CLI I can use the command:

 

2530-24G-PoE(config)# show config status

 

And get the response:

 

The running configuration matches the saved configuration.

 

or

 

The running configuration has been modified and not yet saved.

 


Is there a REST API equivalent to the CLI command?

 

Thanks.


Accepted Solutions
Highlighted
MVP Guru Elite

Re: 2530 - REST API equivalent to CLI

Hi,

 

I think, no... but you can try using AnyCLI ?



PowerArubaSW: Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP... More info

PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...) More info

PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)

PowerArubaIAP: Powershell Module to use Aruba Instant AP

PowerArubaMC: Powershell Module to use Mobility Controller / Master


ACMP 6.4 / ACMX #107 / ACCP 6.5 / ACSP

View solution in original post


All Replies
Highlighted
MVP Guru Elite

Re: 2530 - REST API equivalent to CLI

Hi,

 

I think, no... but you can try using AnyCLI ?



PowerArubaSW: Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP... More info

PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...) More info

PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)

PowerArubaIAP: Powershell Module to use Aruba Instant AP

PowerArubaMC: Powershell Module to use Mobility Controller / Master


ACMP 6.4 / ACMX #107 / ACCP 6.5 / ACSP

View solution in original post

Highlighted
New Contributor

Re: 2530 - REST API equivalent to CLI

Hey,

I hope this will be added as a direct REST API call in the future.

 

As REST API seems to be the thing these days and I want to keep it clean and simple I don't want wo switch between techniques.

 

Thanks.

Highlighted
MVP Guru Elite

Re: 2530 - REST API equivalent to CLI

Hi,

 

you can ask on https://innovate.arubanetworks.com/



PowerArubaSW: Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP... More info

PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...) More info

PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)

PowerArubaIAP: Powershell Module to use Aruba Instant AP

PowerArubaMC: Powershell Module to use Mobility Controller / Master


ACMP 6.4 / ACMX #107 / ACCP 6.5 / ACSP
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: