Wired Intelligent Edge (Campus Switching and Routing)

Reply
Contributor I

After Switch Reboot Date & Time Resetted Automatically | Aruba 2930F Switch

Team,

we have noticed as when Aruba 2930F switch rebooted configured Date & Time automatically changed to default.

 we have confiured Date & Time using "Time Command" switch maintain the time upto reboot /power off.

 

Switch Details are mentioned below:

Part Numbers: JL260A, JL254A

 

Installed Image Details:
/ws/swbuildm/rel_xanadu_zeus_qaoff/code/build/lvm(swbuildm_rel_xanadu_zeus_qaof
f_rel_xanadu_zeus)
Jul 12 2019 07:57:56
WC.16.07.0006
245
Boot Image: Primary

Boot ROM Version: WC.16.01.0006
Active Boot ROM: Primary

 

 

 

Guru Elite

Re: After Switch Reboot Date & Time Resetted Automatically | Aruba 2930F Switch

Are you the original owner of the switch?  How long has this been happening?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Contributor I

Re: After Switch Reboot Date & Time Resetted Automatically | Aruba 2930F Switch

Actually I have enagaed for These Switches Installation along with my team for customer on yesterday.
We have total four switches, we have noticed same thing on all switches (once rebooted date & time changed to old/default time).
Guru Elite

Re: After Switch Reboot Date & Time Resetted Automatically | Aruba 2930F Switch

Then, please calll support:  https://www.arubanetworks.com/support-services/contact-support/


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
MVP Expert

Re: After Switch Reboot Date & Time Resetted Automatically | Aruba 2930F Switch

Greetings!

 

The 2930F switch series does not have a battery backup for the system's Real Time Clock (RTC); as a result, when the switch reboots or loses power, the clock resets to the default date and time.

 

This issue was addressed in WC.16.08 and later software releases — when the switch reboots, the clock is set to the last known good time rather than being reset to 1990.



Matt Fern
Technical Marketing Engineer, Wired Intelligent Edge

Aruba, a Hewlett Packard Enterprise company

8000 FOOTHILLS BLVD  |  ROSEVILLE, CA 95747
T: 916.540.1759  |  E: mfern@hpe.com   |   Matt @ Twitter
Contributor I

Re: After Switch Reboot Date & Time Resetted Automatically | Aruba 2930F Switch

Thanks for the information, we will upgrade the software and let you know the status.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: