my goal : principe switch layer 3 linked to switch layer 2 :
not pc linked directly switch layer 3 because i try from switch layer 3 and pc get ip address from switch layer 3
==========> desktop linked directly to switch layer 2 ( D-link DES-1210 ) and get ip address from switch layer 3 linked to switch layer 2
/////////////////////////////////////////////////////////////////
configuration switch layer 3:
Aruba-2930F-24G-4SFP# show running-config
Running configuration:
; JL259A Configuration Editor; Created on release #WC.16.09.0001
; Ver #14:27.6f.f8.1d.9b.3f.bf.bb.ef.7c.59.fc.6b.fb.9f.fc.ff.ff.37.ef:04
hostname "Aruba-2930F-24G-4SFP"
module 1 type jl259a
ip routing
interface 1
flow-control
exit
snmp-server community "public" unrestricted
vlan 1
name "DEFAULT_VLAN"
untagged 1-28
ip address dhcp-bootp
ipv6 enable
ipv6 address dhcp full
exit
vlan 10
name "RH"
tagged 1
ip address 10.10.10.1 255.255.255.0
dhcp-server
exit
vlan 20
name "office"
tagged 1
ip address 20.20.20.1 255.255.255.0
dhcp-server
exit
dhcp-server pool "RH"
authoritative
default-router "10.10.10.1"
network 10.10.10.0 255.255.255.0
range 10.10.10.2 10.10.10.254
exit
dhcp-server pool "security"
authoritative
default-router "20.20.20.1"
network 20.20.20.0 255.255.255.0
range 20.20.20.2 20.20.20.254
exit
dhcp-server enable
Aruba-2930F-24G-4SFP#
Aruba-2930F-24G-4SFP# conf terminal
Aruba-2930F-24G-4SFP(config)# vlan 10
Aruba-2930F-24G-4SFP(vlan-10)# untagged 3
Aruba-2930F-24G-4SFP(vlan-10)# quit
Aruba-2930F-24G-4SFP(config)# quit
Aruba-2930F-24G-4SFP# write memory
Aruba-2930F-24G-4SFP# show running-config
Running configuration:
; JL259A Configuration Editor; Created on release #WC.16.09.0001
; Ver #14:27.6f.f8.1d.9b.3f.bf.bb.ef.7c.59.fc.6b.fb.9f.fc.ff.ff.37.ef:04
hostname "Aruba-2930F-24G-4SFP"
module 1 type jl259a
ip routing
interface 1
flow-control
exit
snmp-server community "public" unrestricted
vlan 1
name "DEFAULT_VLAN"
no untagged 3
untagged 1-2,4-28
ip address dhcp-bootp
ipv6 enable
ipv6 address dhcp full
exit
vlan 10
name "RH"
untagged 3
tagged 1
ip address 10.10.10.1 255.255.255.0
dhcp-server
exit
vlan 20
name "office"
tagged 1
ip address 20.20.20.1 255.255.255.0
dhcp-server
exit
dhcp-server pool "RH"
authoritative
default-router "10.10.10.1"
network 10.10.10.0 255.255.255.0
range 10.10.10.2 10.10.10.254
exit
dhcp-server pool "security"
authoritative
default-router "20.20.20.1"
network 20.20.20.0 255.255.255.0
range 20.20.20.2 20.20.20.254
exit
dhcp-server enable
//////////////////////////////////////////////////////////////////////////////////////////////////
switch dlink: screen shot
////////////////////////////////////////////////////
so what i can edit and configure or chek switch layer 3 or layer 2 that allwo desktop get ip address from switch layer 3 linked switch layer 2
please parnassus help me because very important for my company that have problem
so i thank a lot to help me and would a solution why dhcp don't work from desktop linked to switch layer 2 and this switch linked to switch layer 3 !!!!!?????????,,