Wired Intelligent Edge (Campus Switching and Routing)

Reply
Highlighted
Occasional Contributor II

Aruba 3810m Firmware Update

Hello,

I'm thinking about the firmware update from an Aruba 3810m which is stacked with a second one.

When I made a Firmware Update both Commander and Standby goes down. Is there a possibility that one is up and after reboot the second one reboots?

Thank you for your advice!

Best regards,

Mic

MVP Expert
MVP Expert

Re: Aruba 3810m Firmware Update

Hi,

 

no. Not possible with hardware stacking (3810m, 2930m).

 

Regards,

 

Jörg

 

Please give kudos, if you like my post.
Please Accept as solution, if my post was helpful.
MVP Expert

Re: Aruba 3810m Firmware Update

Greetings!

 

Switch stacks utilizing backplane stacking (2930M, 3810) and VSF (2930F) will reboot all stack members at once during the software upgrade process.  (The exception is the 5400R series, using the VSF Fast Software Upgrade feature to sequentially reboot two stacked chassis.)



Matt Fern
Technical Marketing Engineer, Wired Intelligent Edge

Aruba, a Hewlett Packard Enterprise company

8000 FOOTHILLS BLVD  |  ROSEVILLE, CA 95747
T: 916.540.1759  |  E: mfern@hpe.com   |   Matt @ Twitter
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: