Wired Intelligent Edge

last person joined: yesterday 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

Aruba 3810m Firmware Update

This thread has been viewed 13 times

  • 1.  Aruba 3810m Firmware Update

    Posted Aug 22, 2018 11:14 AM

    Hello,

    I'm thinking about the firmware update from an Aruba 3810m which is stacked with a second one.

    When I made a Firmware Update both Commander and Standby goes down. Is there a possibility that one is up and after reboot the second one reboots?

    Thank you for your advice!

    Best regards,

    Mic



  • 2.  RE: Aruba 3810m Firmware Update

    Posted Aug 22, 2018 01:59 PM

    Hi,

     

    no. Not possible with hardware stacking (3810m, 2930m).

     

    Regards,

     

    Jörg

     



  • 3.  RE: Aruba 3810m Firmware Update
    Best Answer

    EMPLOYEE
    Posted Aug 23, 2018 12:40 PM

    Greetings!

     

    Switch stacks utilizing backplane stacking (2930M, 3810) and VSF (2930F) will reboot all stack members at once during the software upgrade process.  (The exception is the 5400R series, using the VSF Fast Software Upgrade feature to sequentially reboot two stacked chassis.)