Wired Intelligent Edge (Campus Switching and Routing)

Reply
Occasional Contributor I

ArubaOS 16.08 User roles initial role per port

Hello,

 

this is how you configure a global initial role:

 

(config)# aaa authorization user-role initial-role ROLE-STR

but how do you configure it at per-port level?

 

 

On page 262 Aruba 2540 Access Security Guide for ArubaOS-Switch 16.08 is just an indication that this is possible.

 

initial-role

 

The default initial role “denyall” is used when no other role applies. If a client connects to the switch and lacks a user role associated, then the initial role is used. Any role can be configured as initial role using this option.Initial role can be configured at per-port level. The per port initial role takes priority over global initial role.

Somehow I can't find any CLI reference guide for ArubaOS 16.08.

What is the command to configure it at a per-port level?

 

MVP Expert

Re: ArubaOS 16.08 User roles initial role per port

For me, it is a typo on documentation

 

and you can use ClearPass for push a initial role by port...




PowerArubaSW: Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP... More info


PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...) More info


PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)


PowerArubaIAP: Powershell Module to use Aruba Instant AP




ACMP 6.4 / ACMX #107 / ACCP 6.5
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: