Wired Intelligent Edge

last person joined: 40 minutes ago 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

ArubaOS-CX Simulator Looping Bug

This thread has been viewed 14 times

  • 1.  ArubaOS-CX Simulator Looping Bug

    Posted Nov 14, 2019 02:29 AM

    We tested the OVA version of "ArubaOS-CX" registered in the "ASP Portal".

     

    Here we configure the virtual switch in a looping structure like a triangular structure or a ring structure,

     

    We activated the spanning tree on all switches.

     

    Spanning Tree status is normally indicated by forwarding and blocking.

     

    However, after entering the IP address on the Vlan interface of each switch.

     

    The CPU usage of the "simple_switch" daemon on each switch 90%~150%.

     

    This is the same symptom in the OVA image of the recently posted version 10.03.

     

     



  • 2.  RE: ArubaOS-CX Simulator Looping Bug

    MVP GURU
    Posted Nov 19, 2019 03:05 PM

    Hi,

    it is a simulator...

     

    Do you have check if STP in supported on this case ?