Wired Intelligent Edge

last person joined: 17 hours ago 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

Catalyst 3560G series PoE-48 config *.txt import to Aruba 2530 48G PoE+ Switch

This thread has been viewed 0 times

  • 1.  Catalyst 3560G series PoE-48 config *.txt import to Aruba 2530 48G PoE+ Switch

    Posted Jun 10, 2019 08:39 PM

    Is it possible to import a *.txt config file from Cisco Catalyst 3560G series PoE-48 and import it to Aruba 2530 48G PoE+ Switch?



  • 2.  RE: Catalyst 3560G series PoE-48 config *.txt import to Aruba 2530 48G PoE+ Switch
    Best Answer

    MVP GURU
    Posted Jun 11, 2019 02:27 PM

    No...

     

    need to be convert (and there is no tools for this !)



  • 3.  RE: Catalyst 3560G series PoE-48 config *.txt import to Aruba 2530 48G PoE+ Switch
    Best Answer

    MVP GURU
    Posted Jun 11, 2019 04:34 PM

    As pointed out by @alagoutte you can't simply export a Cisco IOS NOS based Switch's configuration and import (copy) it - as-is - into an ArubaOS-Switch NOS based Switch...Cisco and Aruba (HP/HPE/Aruba) don't use the same NOS Network Operating System (it's a matter of Cisco IOS versus ProVision/ArubaOS-Switch).

     

    You need to examine your actual configuration and try to replicate it by adapting (for what is possible) its commands to cope with ArubaOS-Switch equivalent ones.

     

    There is a nice guide that help doing so. Check it here or here (and also one a little bit older here).

     

    A brief (but interesting) presentation about how Cisco and HP/HPE/Aruba approach VLAN tagging and Port Aggregtion their own way is here.