Hi,
I have a particular tipology, the 2 aruba will receive each 1 uplink from the "MAIN" provider and 1 uplink for the "backup line" from another provider.
i configure VSF for the redudancy but now the 2 switch are configured like 1 single switch and when i connect the 2 uplinks, i create a loop :s so i search a little bit and i founded a topic who spoke about MADVLAN but i tryed it and i didn't have more result.
Have you an idea to do that?
Here are the running config.
Running configuration:
; hpStack_WC Configuration Editor; Created on release #WC.16.06.0006
; Ver #13:4f.f8.1c.9b.3f.bf.bb.ef.7c.59.fc.6b.fb.9f.fc.ff.ff.37.ef:05
hostname "MSW001"
vsf
enable domain 1
member 1
type "JL258A" mac-address 94f128-8cf060
priority 160
link 1 1/7-1/8
link 1 name "I-Link1_1"
link 2 name "I-Link1_2"
exit
member 2
type "JL258A" mac-address 94f128-8cf010
priority 150
link 1 2/7-2/8
link 1 name "I-Link2_1"
link 2 name "I-Link2_2"
exit
port-speed 1g
exit
ip default-gateway 192.168.8.1
interface 1/1
no power-over-ethernet
exit
interface 1/2
no power-over-ethernet
exit
interface 1/3
no power-over-ethernet
exit
interface 1/4
no power-over-ethernet
exit
interface 1/5
no power-over-ethernet
exit
interface 1/6
no power-over-ethernet
exit
interface 1/7
no power-over-ethernet
exit
interface 1/8
no power-over-ethernet
exit
interface 2/1
no power-over-ethernet
exit
interface 2/2
no power-over-ethernet
exit
interface 2/3
no power-over-ethernet
exit
interface 2/4
no power-over-ethernet
exit
interface 2/6
no power-over-ethernet
exit
interface 2/7
no power-over-ethernet
exit
interface 2/8
no power-over-ethernet
exit
snmp-server community "aruba"
vlan 1
name "Stack_MSW001"
untagged 1/1-1/6,1/9-1/10,2/1-2/6,2/9-2/10
ip address 192.168.8.5 255.255.255.0
exit