HP ARUBA 2930F SWITCH
02-23-2018 03:15 PM
I am new to this community and wanted to learn more about hp switches
Currently we have hp 2930 as stacks using chain topolgy.
We have several vlan setups.
I am struggling to configure member 2 in the stack through the commander.
For example if I want to configure a port which is located on switch member 2 port 2/34 onto (vlan office) from (Vlan Reception) what are the commands.
If someone can tell me step by step commands please much appreciated.
Re: HP ARUBA 2930F SWITCH
02-26-2018 02:10 AM
On ArubaOS switches, you configure the VLAN and then attach ports to it either untagged or tagged.
For example if your Office VLAN is VLAN2, and port 1/8, 2/2 through 2/5 must be access ports in that VLAN, and port 1/5 is the (tagged) uplink, the config could be like this:
vlan 2 name "Office" untagged 1/8,2/2-2/5 tagged 1/5 ip address 10.254.1.1 255.255.255.0 exit
Is that what you are looking for?
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).