Product and Software: This article applies to all Aruba Mobility Access Switches and ArubaOS versions.To recover the login credentials of the Aruba S3500 and S2500 Switches, follow these steps:
User:password Password:********* >>type in "forgetme!"(ArubaS3500) >enablePassword:****** >>type in "enable"
(ArubaS3500) #configure terminal Enter Configuration commands, one per line. End with CNTL/Z(ArubaS3500) (config) #mgmt-user admin rootPassword:******** >>type in the new password for user "admin"Re-Type password:********(ArubaS3500) (config) #exit(ArubaS3500) #exit(ArubaS3500) >exitUser: adminPassword: ******** >>login with the new admin password(ArubaS3500) >enablePassword:****** >>type in password as "enable"
Note: Immediately after you change the credentials, change your switch "enable mode" password, which is "enable" by default.(ArubaS3500) #configure terminalEnter Configuration commands, one per line. End with CNTL/Z(ArubaS3500) (config) #enable secretPassword:****** >>type in the new enable secretRe-Type password:******(ArubaS3500) (config) #exit(ArubaS3500) #write memory
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.