Wired Intelligent Edge (Campus Switching and Routing)

Reply
Contributor I

How to make "screen length" or "no page" permanent?

I am trying to get rid of the need to constantly hit space bar on show commands. I have tried both the screen length and no page commands and neither one seems to be permanent. Once I reboot the switch and/or change sessions the commands stop working. Is there any way to make these options permanent?

MVP Expert

Re: How to make "screen length" or "no page" permanent?

Hi,

 

What switch OS ?




PowerArubaSW: Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP... More info


PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...) More info


PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)


PowerArubaIAP: Powershell Module to use Aruba Instant AP




ACMP 6.4 / ACMX #107 / ACCP 6.5
Contributor I

Re: How to make "screen length" or "no page" permanent?

Thanks for the response. The switches we are using are 2930Ms and 2530s so it should be ArubaOS.

MVP Expert

Re: How to make "screen length" or "no page" permanent?

Do you have try

terminal length 1000

?




PowerArubaSW: Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP... More info


PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...) More info


PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)


PowerArubaIAP: Powershell Module to use Aruba Instant AP




ACMP 6.4 / ACMX #107 / ACCP 6.5
Regular Contributor I

Re: How to make "screen length" or "no page" permanent?

Paging is enabled by default for a new CLI session.

This is a per CLI session command.

Refer AOS 8.5.0.0 CLI Reference Guide(Page: 813). 

 

Use the command "no paging".

The command should be the same irrespective of the code version.

 

You need to have enable access to issue this command.

This should solve having to hit the space bar continuously.

Ajay Kumar Ravipati
ACMA (V8) | ACMP (V8) | CCENT | CCNA (R&S) | PAN-OS 8.0 ACE
MVP Expert

Re: How to make "screen length" or "no page" permanent?


@A_RAK wrote:

Paging is enabled by default for a new CLI session.

This is a per CLI session command.

Refer AOS 8.5.0.0 CLI Reference Guide(Page: 813). 

 

Use the command "no paging".

The command should be the same irrespective of the code version.

 

You need to have enable access to issue this command.

This should solve having to hit the space bar continuously.


this command (and guide) are for Aruba Mobility Controller...




PowerArubaSW: Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP... More info


PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...) More info


PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)


PowerArubaIAP: Powershell Module to use Aruba Instant AP




ACMP 6.4 / ACMX #107 / ACCP 6.5
Regular Contributor I

Re: How to make "screen length" or "no page" permanent?

Hi Alexis,
Thanks for pointing that out.

The switch equivalent for the 2930f series is
"no page".
More information can be seen in the cli,
Switch>?
Information on toggling the "page" should be available.
Ajay Kumar Ravipati
ACMA (V8) | ACMP (V8) | CCENT | CCNA (R&S) | PAN-OS 8.0 ACE
Contributor I

Re: How to make "screen length" or "no page" permanent?

Thanks for the response. I have tried the "no page" command, but it isn't permanent. I would rather not enter it every time I login to a switch, so I was wondering if there was a command that wasn't tied to your session. 

Highlighted
Contributor I

Re: How to make "screen length" or "no page" permanent?

Thanks for the suggestion, but after trying it it seems that is also tied to your session. I had to enter it each time I logged into a switch. Seems like there isn't a permanent option for that. 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: