I have 2 2930f switches I want to connect with VSF. I have configured ports 1-4 on both switches. sho vsf shows only 1G for port speed. Am I using all four ports in the VSF? Is it load balancing?
CCA_CORE# sho vsf
VSF Domain ID : 1
MAC Address : d06726-3bbd0b
VSF Topology : Chain
VSF Status : Fragment Active
Uptime : 0d 3h 39m
VSF MAD : None
VSF Port Speed : 1G
Software Version : WC.16.03.0005
Mbr
ID MAC Address Model Pri Status
--- ------------- -------------------------------------- --- ---------------
1 d06726-3bbd00 Aruba JL262A 2930F-48G-PoE+-4SFP Sw... 128 Commander
2 d06726-3c0000 Aruba JL262A 2930F-48G-PoE+-4SFP Sw... 128 Standby Booting
CCA_CORE(config)# sho vsf lin det
VSF Member: 1 Link: 1
Port State
-------- ------------
1/1 Up: Connected to port 2/1
1/2 Up: Connected to port 2/2
1/3 Up: Connected to port 2/3
1/4 Up: Connected to port 2/4
VSF Member: 2 Link: 1
Port State
-------- ------------
2/1 Up: Connected to port 1/1
2/2 Up: Connected to port 1/2
2/3 Up: Connected to port 1/3
2/4 Up: Connected to port 1/4