Wired Intelligent Edge

Hello,

Please find in attachment the modification that one of our customer have done by mistake on the web-interface of his Aruba Switch.

He has enabled the only SNMP access on it.

Do you have the list of commands that we can type directly connected on the switch in order to re-enable all accesses?

Thanks in advance for your help.

Guillaume

no ip authorized... ?

no, http access not enabled

Greetings!

If you can check the running configuration ('show running-config'), you should see a command similar to the following: 

ip authorized-managers 10.40.0.65 255.255.255.0 access-method snmp

What you'll need to do is either remove that line to re-enable unrestricted access to the switch:

switch(config)# no ip authorized-managers 10.40.0.65

...or modify the command to allow full access from this subnet using all access methods:

switch(config)# ip authorized-managers 10.40.0.65 255.255.255.0 access manager access-method all

For more information, refer to the ArubaOS-Switch Hardening Guide. 

Thank you for your help, I'll check this out with our customer but it's exactly what I was looking for.

Have a nice Day/Evening !