Wired Intelligent Edge (Campus Switching and Routing)

Reply
Highlighted
Occasional Contributor I

Support for MILJET DAC on Aruba 2930F

Does Aruba 2930F supports this DAC cables?

https://www.miljet.net/produto/mj-sfp-h10gb-cu3m/

 

I have connected in my switch but they were not working. They are shown in 'show tech transceiver' but they are marked as unsupported (or SFP_UNKNOWN).

 

Then I ran 'allow-unsupported-transceiver'. Still I have got no link from the transceiver. Trying a supported transceiver worked fine.

Is there any other command that would work. Maybe a firmware update?

 

Thanks.


Accepted Solutions
Highlighted
MVP Guru

Re: Support for MILJET DAC on Aruba 2930F

The Aruba 2930F Switch series supports only the J8177D as "Copper RJ45" Transceiver.

 

As reference have a look at ArubaOS-Switch and ArubaOS-CX Transceiver Guide (January 2019, 6th Edition) through which you should learn what transceiver is supported where.

 

Clearly refer to Aruba 2930F QuickSpecs to see what transceivers are supported on that particular series.

View solution in original post


All Replies
Highlighted

Re: Support for MILJET DAC on Aruba 2930F

did you re boot after the allow-unsupported-transceiver command?



- - - - Aruba ACCX #748, ACDX #758, ACMP, ACEAP | HPE Master ASE - - - -
- - - - - - - Feel free to give kudos or accept as a solution! - - - - - - - - -
Highlighted
Occasional Contributor I

Re: Support for MILJET DAC on Aruba 2930F

No. I will try.

 

Does the docs mention it?

MVP Guru

Re: Support for MILJET DAC on Aruba 2930F

Hi! first thing first: The one we are referring about is an unsupported feature...it does not imply “support” for a non-certified transceiver...so you can't really expect that allowing something unsupported shall make any Transceiver to work. There is no guarantee.

Documantation (https://community.arubanetworks.com/aruba/attachments/aruba/CampusSwitching/3089/1/ARUBAOS-SWITCH%25252520UNSUPPORTED%25252520TRANSCEIVER%25252520GUIDE%25252520V2.pdf) says so (it could have been written better).
Highlighted
Occasional Contributor I

Re: Support for MILJET DAC on Aruba 2930F

Unfortunately even after restart the transceiver still show as not supported.

 

Does 2930F supports copper transceivers? I do believe so because of https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c05235854

But this https://community.arubanetworks.com/t5/Wired-Intelligent-Edge-Campus/How-to-display-detailed-interface-transceiver-information-on/ta-p/180614 mentions some restrictions.

 

Aruba-VSF-2930F# show tech transceivers 
Cmd Info : show tech transceivers

transceivers

Transceiver Technical Information: 
 Port # | Type      | Prod #     | Serial #         | Part #   
 -------+-----------+------------+------------------+----------
 2/51  *|    ??     |       ??   | unsupported      |  

* third-party transceivershow time
Mon Jan  1 01:16:51 1990


=== The command has completed successfully. ===

Logs.

 

I 01/01/90 01:22:59 00406 ports: ST2-CMDR: port 2/51 xcvr hot-swap remove.
W 01/01/90 01:23:15 00536 FFI: ST2-CMDR: port 2/49 Transceiver type not
            supported in this port.
----  Bottom of Log : Events Listed = 122  ----
Aruba-VSF-2930F#                               

 

Highlighted
MVP Guru

Re: Support for MILJET DAC on Aruba 2930F

The Aruba 2930F Switch series supports only the J8177D as "Copper RJ45" Transceiver.

 

As reference have a look at ArubaOS-Switch and ArubaOS-CX Transceiver Guide (January 2019, 6th Edition) through which you should learn what transceiver is supported where.

 

Clearly refer to Aruba 2930F QuickSpecs to see what transceivers are supported on that particular series.

View solution in original post

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: