Wired Intelligent Edge (Campus Switching and Routing)

Reply
Highlighted
Occasional Contributor I

Switch management

Hi there,

I'm new to Aruba Switches; we have replaced several Cisco switches with Aruba Swithes. The only issue here is we can manage the switches indiviudaly (via VLAN management ) to add/remove VLANs, port status, ..etc, so is there a way for example to use one IP address to manage/veiw all the switches.

 

 

Thanks

Frequent Contributor I

Re: Switch management

Hello you can add them all in Airwave and manage them from Airwave. I am not sure, if there is a way on Switches directly if you do not have Airwave. 

-If you got what you need with my answer please give kudos and mark it as solution.
MVP Expert

Re: Switch management

Greetings!

 

Depending on your switch model, you may be able to utilize our front plane stacking feature (Virtual Switching Framework, or VSF) or dedicated backplane stacking, which would combine multiple switches into a single logical switch that has a single point of management. 

 

The other option is to utilize a management platform such as AirWave or Central to manage multiple devices from a single interface.



Matt Fern
Technical Marketing Engineer, Wired Intelligent Edge

Aruba, a Hewlett Packard Enterprise company

8000 FOOTHILLS BLVD  |  ROSEVILLE, CA 95747
T: 916.540.1759  |  E: mfern@hpe.com   |   Matt @ Twitter
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: